Accessories
2828.1
Speed Control (Rotary type) (10 Amps)
- Specially designed for use with S&P ventilators rated at 10 Amps or less
- Metal housing
- 10 A, 120 VAC, 60 Hz
6002 / 6002-14B / 6002A / 6002-14A
Ventilation Gas Detector
- Stand-alone operation with 1 or 2 adjustable alarm relays, indicators and strobe
- 6002-A and 6002-14A have 1 relay and accept 4-20mA or 2-10V signals from VFDs or ECMs for speed control
- BTL listed Smart Sensor
- BACnet MS/TP RS485 interface
- CAN network interface for master-slave operation or central control
- Pre-calibrated plug-and-play sensor modules
- Impact resistant water resistant enclosure
BACnet Fan Control
- Connects ERVs to a building at up to 50% less cost than adding another I/O connection
- Adds remote fan control functionality to standard control units
- Set fan on/off status and speed (speed control limited to TRC, TRC-RT, and TRCeN/TRCe units)
- Wall-mounted, LCD display
- 24VAC powered
- Installation: The field-installed accessory can be mounted by the unit or on a standard junction box
- Digital input interlock: Systems may be turned on or off based on air-handling unit (AHU) status, smoke-detector input, and occupancy sensor
- BACnet MS/TP integration: Users can view statuses, shut down the unit based on building needs, and set fan speeds
- BTL listed
EBPT
Electronic Push Button timer (10-20-30-60 min)
- 120 VAC 20 AMP Rating
- 5 Button timer with off button
- Green indicator lights indicating the selected time intervale
ECM-DPC
EC Differential Pressure Control
- Designed to control an EC Motor powered fan
- Used to maintain an adjustable static pressure set point
- Recommended for Rooftop Exhaust, Cleanrooms, Ventilation Systems, Restaurants, Multi-family, Residential, and Hotels applications
ECM-MSPD
ECM Multi-Speed Control
- Is an interface for setting and switching two independent motor speeds for a single motor
- Uses an open-closed contact (by others) to switch between speeds easily
- Has on-board multi-meter nodes to provide set-point and RPM measurements
- Recommended for use in restaurants, multi-family, condos, and schools where demand for controlled ventilation applications require high and low speed operation
ES24V
Envirosense ventilation control, 24V
- On/Off/Eco for continuous/off/intermittent operation respectively
- Auxiliary terminals for motorized damper, duct heater and T-Stat integration
- Measures outdoor humidity and temperature and minimizes ventilation at adjustable high and low outdoor temperature and humidity lockouts
- Easily paired with either a dedicated fresh air fan, a motorized damper while interlocked with the A/C blower or a combination of the two
FT247
Programmable fan timer, 24/7 day
- 7 programmable on/off time events
- 15 Amp 120 Volt 60 Hz
- Rechargeable battery backup saves settings during power outages
FLTD-60
Fan/Light Delay timer switch
- Adjustable 1 - 60 minute time delay for fan operation after lights are turned off
- Saves space by controlling both the ventilating fan and light from a single gang box
FT622
ASHRAE 62.2 bath fan ventilation controller
- Ventilates an adjustable number of minutes each hour to help satisfy code requirements
- Compact control operates both the light and ventilator saving space
- Adjustable delay timer to operate the ventilator after the room light has been turned off
PC3S
3-Switch Control
- 3 SPST switches fits in standard 2 X 4 electrical box
- Allows for control of additional accessories on the PC product line
R24V
General Purpose Switching Relay
- Compatible with REFRESH series RFV8, RF8, RF10. 24VAC 12FLA 60LRA 125VAC
- 16 Amp switching and 55 Amp inrush current
- Quick-connect terminals
- Universal mounting bracket
- UL and CUR
SCR
Speed Control (Rotary type) (10 Amps)
- 10 to 15 amp range depending on the model selected
- 120 and 230V VAC solid state speed control depending on model selected
- Adjustable minimum speed pot switch available behind speed control faceplate preventing motor overload
- Metal housing
SCS5
Speed Control (Slide type) (5 Amps)
- Aesthetically pleasing decorative speed control face plate with indicator light
- Integrated on/off switch saves speed setting between uses
- Adjustable minimum speed pot switch setting behind the faceplate to prevent motor overload
SHW-20
Wall Mounted De-humidistat
- 24 VAC Wall Mounted De-Humidistat
- 20%-80% humidity sensing range
- 32F - 140F degree temperature range
- 5% or 15% relative humidity differential
SPT-100X
Pressure Sensor
- Pressure switch module provides easy interlocking of ventilator fan to equipment
- Integrated timer runs ventilator for 10 minutes upon sensing pressure then shuts off
- Fixed to operate on pressure rise of .05" w.c.
SRT-30
Rotary spring wound timer
- 0 - 30 minute rotary spring wound timer - white
- SPST 20 amp, 120 VAC
THVLS Eco-Digital
7” Digital Touch Screen Multi-Fan Controller
- Control multiple fans in groups or individually
- 0-100% speed control
- Fully digital interface
- Visual indicators of speed and direction
- Password lockout capability
THVLS Eco-Manual
Single Fan Controller
- Easily mounted to wall
- Control each fan individually
- S&P USA supplies you with 100 ft. of 6-core cable for installation
- Operate your fans in forward (cooling) motion
- Manually control each fan’s speed
VL
Vent Light
- Longer duct collar for 4” duct
- Extendable hanger bars up to 24”
- 7.5” grill
- Built-in backdraft damper
- Available with LED, Halogen and CFL lighting options
- 3 bulb options