Accessories

S&P's accessories are available to enhance your air movement system.

411

411

Non-flanged horizontal mount exhaust backdraft damper

  • Sizes available: 8"W x 8"H to 30"W x 30"H
  • Galvanized Steel frame with aluminum blades
  • Maximum free area velocity - 2000 fpm
  • Optional motor pack available (411611)
  • Use in roof curbs, duct work or wall collars when using a fan or power roof ventilator
611

611

Non-flanged horizontal mount exhaust backdraft damper

  • Sizes available: 34"W x 34"H to 48"W x 48"H
  • Galvanized Steel frame with aluminum blades
  • Maximum free area velocity - 2250 fpm
  • Optional motor pack available (411611)
  • Use in roof curbs, duct work or wall collars when using a fan or power roof ventilator

502

502

Rear flanged low velocity gravity exhaust shutter

  • Sizes available: 10"W x 10"H to 24"W x 24"H
  • Galvanized Steel frame with aluminum blades
  • Maximum free area velocity - 2000 fpm
  • Use with direct or belt drive exhaust fans
  • For vertical mounting only
556

556

Rear flanged general purpose exhaust shutter

  • Sizes available: 12"W x 12"H to 48"W x 48"H
  • Single or Double Panel
  • Galvanized Steel frame with aluminum blades
  • Maximum free area velocity - 2500 fpm
  • Optional motor pack available (EAS)
  • Use with direct or belt drive exhaust fans
  • For vertical mounting only
EAS-RF

EAS-RF

Rear flanged exhaust shutter for areas where corrosion may be a problem

  • Sizes available: 12"W x 12"H to 48"W x 48"H
  • Single or Double Panel
  • Aluminum frame and blades
  • Maximum free area velocity - 2500 fpm
  • Optional motor packs available (EAS)
  • Use with direct or belt drive exhaust fans
  • For vertical mounting only
EAS-HDGS

EAS-HDGS

Rear flanged exhaust shutter for applications that require higher velocities.

  • Sizes available: 12"W x 12"H to 48"W x 48"H
  • Single or Double Panel
  • Aluminum frame and blades, stainless steel tie rods
  • Maximum free area velocity - 3250 fpm
  • Use with direct or belt drive exhaust fans
  • For vertical mounting only
FGS

FGS

Rear flanged exhaust shutter for areas where corrosion is a known problem

  • Sizes available: 12"W x 12"H to 48"W x 48"H
  • Single or Double Panel
  • Heavy-duty fiberglass pultrusion frame and blades, stainless steel tie rods
  • Maximum free area velocity - 2500 fpm
  • Use with direct or belt drive exhaust fans in chemical plants and poultry/swine confinement operations
  • For vertical mounting only
304SS

304SS

Rear flanged exhaust shutter for areas that require extreme corrosion resistance

  • Sizes available: 12"W x 12"H to 36"W x 36"H
  • 304 stainless steel fame and blades, stainless steel tie rods
  • Maximum free area velocity - 2500 fpm
  • Use with direct or belt drive exhaust fans in chemical plants and food processing operations
  • For vertical mounting only
  •  
EASB and EASW

EASB & EASW

Rear flanged exhaust shutter for areas where corrosion is a known problem

  • Sizes available: 36", 39", 51", 54" square
  • Painted extruded aluminum frame with UV stabilized PVC blades with yellow zinc dichromate rods
  • Maximum free area velocity - 1500 fpm
  • Use with direct or belt drive cone or slant-wall exhaust fans in poultry or swine confinement areas
  • For vertical mounting only
  • Available in white or black

ACD

ACD

Extruded aluminum motorized volume control damper

  • Sizes available: 12"W x 12"H to 48"W x 48"H
  • Extruded aluminum hat channel frame with extruded aluminum blades
  • Internally mounted factory installed 100-240 volt power open / spring close motor with an end switch
  • Maximum free area velocity - 3500 fpm
  • Use in exhaust or supply applications
  • For vertical or horizontal mounting (typically walls or curbs)
AMD

AMD

Heavy duty motorized volume control damper

  • Sizes available: 12"W x 12"H to 48"W x 48"H
  • Extruded aluminum frame and blades
  • Internally mounted factory installed 120/240 volt power open / spring close motor with an end switch
  • Maximum free area velocity - 3500 fpm
  • Use in exhaust or supply applications
  • For vertical or horizontal mounting (typically walls or curbs)
  •  
  •  
CAR

CAR

Metal Backdraft Damper

  • Sizes 100 to 400
  • Galvanized Steel Collar
  • Lightweight Aluminum Damper Blade
  • Spring loaded for positive closure
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
GMD

GMD

Heavy duty motorized volume control damper

  • Sizes available: 12"W x 12"H to 48"W x 48"H
  • Galvanized steel frame and blades
  • Internally mounted factory installed 120/240 volt power open / spring close motor with an end switch
  • Maximum free area velocity - 3500 fpm
  • Use in exhaust or supply applications
  • For vertical or horizontal mounting (typically walls or curbs)
  •  
  •  
MCA

MCA

TD Twin Direct Connection Backdraft Shutter

  • Sizes 100 to 315
  • Shutter prevents air from re-circulating when the fans not in use.
  • Fits over TD lip
MD

MD

Motorized Damper

  • Sizes 4-14
  • Normally closed, power open, 24V motorized damper for round ducts.
  • Control the sequencing of outside air in forced air systems.
  • Motorized Damper Kits. View here.

ACL

ACL

Extruded aluminum combination louver/damper

  • Sizes available: 18"W x 18"H to 48"W x 48"H
  • Offers superior resistance to rain and weather
  • Ability to completely close the opening if needed
  • Standard birdscreen on the interior
  • Extruded aluminum frame
  • Drainable style 45 degree extruded aluminum blades
  • Optional motor packs available (MTR-ACL)

Ecowatt Drive

Ecowatt® Drive

Variable Frequency Drive

  • Easy motor pairing and performance control
  • Set just 4 parameters to get your fan started
  • Equipped with the latest energy-saving features
  • Dual safe torque off (STO)
ECM-DPC

ECM-DPC

EC Differential Pressure Control

  • Designed to control an EC Motor powered fan
  • Used to maintain an adjustable static pressure set point
  • Is recommended for Rooftop Exhaust, Cleanrooms, Ventilation Systems, Restaurants, Multi-family, Residential Hotels applications
  •  
ECM-MSPD

ECM-MSPD

ECM Multi-Speed Control

  • Is an interface for setting and switching two independent motor speeds for a single motor
  • Uses an open-closed contact (by others) to switch between speeds easily
  • Has on-board multi-meter nodes to provide set-point and RPM measurements
  • Is recommended for use in restaurants, multi-family, condosm and shcools where manual or demand for controlled ventilation applications require high and low speed operation
  •  
THVLS Eco-Digital

THVLS Eco-Digital

 7” Digital Touch Screen Multi-Fan Controller

THVLS Eco-Digital 7” Digital Touch Screen Multi-Fan Controller allows you to control multiple fans in groups or individually. Its fully digital interface features visual indicators of speed and direction with password lockout capability.

  • Control multiple fans in groups or individually
  • 0-100% speed control
  • Fully digital interface
  • Visual indicators of speed and direction
  • Password lockout capability
THVLS Eco-Analog

THVLS Eco-Manual

THVLS Eco-Manual Single Fan Controller

THVLS Eco-Manual Single Fan Controller allows manual control of a fan speed in the cooling direction. One THVLS Eco-Manual controller controls one THVLS fans.

  • Easily mounted to wall
  • Control each fan individually
  • S&P USA supplies you with 100 ft. of 6-core cable for installation
  • Operate your fans in forward (cooling) motion
  • Manually control each fan’s speed.

ADL

ADL

Aluminum door louver

  • Can be used to transfer air through any barrier
  • Ideal for use with 1-38" to 2-1/4" thick wood or metal doors
  • Extruded aluminum frame and blades
  • 204-R1 clear anodized finish
SDL

SDL

Steel door louver

  • Can be used to transfer air through any barrier
  • Ideal for use with 1-38" to 2-1/4" thick wood or metal doors
  • Cold rolled steel frame and blades
  • Gray primer finish

Filter Box

FB

Filter Box

  • Size 4-6
  • Compatible with MERV 8 Filter
  • Filter Size : 8 x 8 x 2 (NOMINAL)
  • Residential and Commercial Applications
BreatheClean Straight Filter Box

BreatheClean Filter Box

Straight

  • Uses advanced filtration and Engineered with NPBI®, the patented technology that removes contaminants, including pathogens, from interior air.
  • Comes standard with MERV 13 Filters
  • UL2998 Certified
BreatheClean Banked Filter Box

BreatheClean Filter Box

Banked

  • Uses advanced filtration and Engineered with NPBI®, the patented technology that removes contaminants, including pathogens, from interior air.
  • Comes standard with MERV 13 Filters
  • UL2998 Certified
BreatheClean Residential Filter

BreatheClean Filter Box

Residential

  • Uses advanced filtration and Engineered with NPBI®, the patented technology that removes contaminants, including pathogens, from interior air.
  • Comes standard with MERV 13 Filters
  • UL2998 Certified

AFL

AFL

Aluminum fixed louver

  • Sizes available: 18"W x 18"H to 48"W x 48"H
  • Provide good protection from rain and weather at an economical price
  • Standard birdscreen on back
  • Aluminum frame
  • K-style non-drainable 45 degree aluminum blades
GFL

GFL

Galvaneal steel fixed louver

  • Sizes available: 18"W x 18"H to 48"W x 48"H
  • Provide good protection from rain and weather at an economical price
  • Standard birdscreen on back
  • Galvaneal steel frame
  • K-style non-drainable 45 degree galvaneal steel blades
DFL

DFL

Drainable extruded aluminum fixed louver

  • Sizes available: 18"W x 18"H to 48"W x 48"H
  • Drainable blade design channels water away from the blades and down the jambs
  • Standard birdscreen on back
  • Extruded aluminum frame
  • Drainable style 45 degree extruded aluminum blades